3D Printing

REVOLUTION i3 3D Printers

Screen Shot 2015-03-27 at 9.11.28 PM

We design and build high quality Prusa RepRap Mendel Rework REVOLUTION i3 variant 3D Printers.  With a focus on streamlined industrial design, high quality parts, strength and precision.


Our latest state of the art 3D printer with over 20 upgrades, a new cable chain system, heated bed and LED Lighting System. Our RepRap Prusa.  Full tech specs are listed below.


REVOLUTION i3 3D Printer $1,250 CDN            PURCHASE HERE


We also provide resources for the open source 3D printing community

Settings and Printing | Slic3r Software | Pronterface Software | Download Build Calibrate | Solutions and Troubleshooting | Our Files On: Pinshape | Thingiverse


519.327.8335 RevolutionMediaGroup@iCloud.com


Colours Black
Dimensions 460 x 370 x 583 cm Print area: 215 x 210 x 180 mm Box dimensions: 408 x 425 x 233 cm
Weight  9,7 Kg
Build Volume Width: 190 mm           Depth: 185 mm           Height: 200 mm
Print speed Recommended speed: 40-60 mm/s Maximum recommended speed: 80-100 mm/s
Electronics Arduino MEGA type microcontroler with RAMPS 1.4 and Polulu style stepper drivers. | Power supply included | Thermistors in the extruder Heater cartridge: | Electronics enclosed in case with 40mm cooling fan | Connectivity: USB Port
General Mechanics Precise 1/4 inch waterjet cut aluminium frame  | NEMA 17 stepper motors with precision aluminium pulleys and GT2 timing belts. | Toughened chrome bars for the X, Y and Z carriages | LM8UU linear ball bearings for the X, Y and Z axes | B623ZZ axial ball bearings for the X and Y pulleys and Nylon bushings | Flexible couplings for the threaded bars on the Z axis | 4-point cushioned levelling system for the print base Quick-change print base system with clips | Parts printed using PLA and ABS
Extruder J-Head hot end with 0.35 mm orifice for fine detail. Updated Wades style extruder with dual purpose cooling fan (for both extruder and PLA cooling)
Filament 1.75mm with maximum variance of +/- 0.05mm. PLA, Nylon, T.Glase, ABS, HIPS, NinjaFlex.
Software Marlin firmware installed and pre-configured. USB cord included. | Compatible operating systems: Windows XP and later, Mac OS X 9 and later and Linux | Open source software: Slic3r and Pronterface(Printrun) recommended however is compatible with a wide range of 3D printing software and firmware
Build and Shipping Time 4-6 Weeks | We will notify you each step of the way so you know exactly how long it will be.
Lighting  6 LED Lighting system to light up your prints while printing
Cable Chain System  All cables are managed within a cable chain system.  No cables are exposed therefore machine can easily be transported without concern for cable damage.